Install Assioma just like a common pedal
Top ArticlesHow to install Assioma
You can install the Assioma power meter pedals on the crank arm of your bike in just a few minutes without the assistance of a mechanic, safely and easily on your own.
Install, remove and move Assioma from one bike to another anytime you want with a simple hex key: just like a common pedal.
Tighten the pedals, perform a quick manual calibration via the Assioma app and you are ready to go! Do not worry about any issue with the alignment, the technology of Assioma already takes care of everything.
Automatic Calibration
Starting from the 4.75 firmware update, Assioma automatically calibrates.
Auto-calibration performs a zero-offset as you would do manually, with the difference that it will be even easier and faster for you to start your ride!
Manual calibration is still required at first installation or when Assioma is swapped between bikes.
Watch the video about the quick bike change:
Read the other articles
- The core of Assioma PRO MX
- Advantages of Rechargeable Batteries in MTB Pedal-Based Power Meters
- Rock solid reliability
- How to install Assioma PRO MX
- Rechargeable battery vs. Replaceable battery?
- Assioma’s uniqueness
- The resistance of Assioma: tested in laboratory, proven on the road
- The advantages of the IAV Power
- How to Update the Firmware of Assioma
- Data measured by the Assioma power meter pedal
- The Accuracy of Assioma: consistent and guaranteed
- Assioma Recharging System: smart and green
- Assioma DUO-Shi: All you Need to Know
